Aero-Sharp Solar Inverters
Aero-Sharp Data Sheets, Manual and common errors
Unfortunately the Aero-Sharp company is no longer trading in Australia which means if you have an issue or fault with your Aero-Sharp inverter you won’t be able to get any assistance from the manufacturer.
Faulty AeroSharp Inverter? Click here for your options.
Aero-Sharp Inverter User Manual (Aero-Sharp data sheet included)
AeroSharp Inverter Fault Codes
Common Aero-Sharp Solar Inverter Errors and Faults
Aero-Sharp Solar Inverter fault light On
Aero-Sharp Solar Inverter 0W power output
Aero-Sharp Solar Inverter Grid Volt Error
The inverter is buzzing and shows no lights. I’ve turned it off but don’t know what to do now.
Any ideas?? I’m really stuck!
Hi Sarah,
This sounds like an internal fault with the inverter. It is best to switch OFF the inverter and contact a local solar installer. If you live on the Gold coast (AUS) we can help out.
Hi, thanks for this helpful site. Our inverter had shown a system error on the LCD, and the fault light is on. We rebooted the system, and it has gone to standby mode.
Hi Gillian, sounds like you will need the assistance of a local solar accredited electrician. If you are near the Gold Coast we can help, otherwise it will be best to google a reputable local solar company to assist you further. Thanks
Hello, I have a query. Our Aero-Sharp inverta in the middle of the afternoon does a reset on the E-today & T-today. Is normal or do you think we may have a problem with the system.
Paul K
Hi Paul, your issue is probably due to the internal clock being setup with the incorrect time. As long as the Aerosharp inverter is still producing power it shouldn’t be an actual problem with the inverter.
I have three phase power to my property but an aero-sharp inverter. Does this mean i’m only feeding back onto the grid on a single phase or are these 3 phase inverters?
model number is: HR-INV-X01-020
Nominal AC voltage: 230Vrms
Max AC current: 10.0Arms
Hi Woody! Your inverter would only be feeding in to one of the 3 phases ad it’s only a single phase inverter.
HR-INV-X01-015
Hi
Can you share the circuit diagram for the main board (PV-1KMAIN-V1.2, 09/05/10).
I need to know the component labelled Q503 that has blown. I have no Pout and this maybe the MOSFET controller for the output relays.
Thanks
Sorry Duncan, we have no access to a circuit diagram for the Aerosharp inverters.