Fronius Solar Inverter STATE 401 Error – What can you do?

Fronius STATE 401 error message on inverterAs a Fronius service partner we’ve seen a number of Fronius IG series inverters with STATE 401 errors. The STATE 401 error code on a Fronius IG solar inverter is telling you that there is a communications error between the various internal components of the inverter. Fronius list the following as possible causes:

  • Contact error on a ribbon cable inside the inverter
  • Temporary internal communication error on the inverter
  • Hardware problem on the inverter

As can be seen this is usually an internal fault with the inverter which will need to be repaired by a Fronius service partner such as Gold Coast Solar Power Solutions but to ensure that it isn’t just a one off error the best thing to do is try to reboot the inverter.

Get help from Gold Coast Solar Power Solutions by filling out this solar inverter help form

To reboot your Fronius inverter follow the system shutdown procedure which should be near your inverter or possibly in your switchboard. Normally the shutdown procedure will be as follows.

  • 1. Locate the Solar Supply Main Switch in your switchboard and switch it OFF
  • 2. Locate the PV ARRAY MAIN SWITCH / SOLAR DC ISOLATOR (usually right beside the inverter) and switch it OFF

The inverter will turn off after a few seconds, wait 30 seconds or so and turn the system back on by turning the switches you just turned off back ON; the order in which you turn them on isn’t important. The inverter will attempt to start up, if after a few minutes the system is back in operation well done!

If it’s still coming up with a STATE 401 error or another fault code then it looks like you are going to need professional help.

How to get a Fronius STATE 401 error fixed

Gold Coast Solar Power Solutions are a Fronius Service PartnerIf your Fronius inverter is still within the warranty period or even if your not sure (a 5 year warranty is standard) then you can call Fronius directly on 03 8340 2910 or if your near the Gold Coast or Brisbane you can contact us here.

Before we can provide any advice we will require your inverters serial number which can be found underneath the inverter. It will be 8 digits followed by a / and 2 more digits, such as 12345678/20.

If your inverter is out of the warranty you have 2 options:

  • 1. Pay to get it fixed (and still have no warranty)
  • 2. Install a quality replacement inverter with a full new warranty.

Either way we can help, please complete the form above under the URGENT heading and we’ll assist you further.

Need service for your solar power system?

Need more information on Fronius solar inverters? Checkout the below.

For more information on Fronius solar inverters including inverter datasheets, manuals, fault codes etc. click here.

Need a quality solar inverter? We deliver Australia wide

Got A Question About Solar Power? Click Here For Answers!

Learn more about solar power battery storage here

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.

*
To prove you're a person (not a spam script), type the security word shown in the picture. Click on the picture to hear an audio file of the word.
Anti-spam image